Rotary seal, internal sealing, Type RI
The internal sealing rotary seal type RI is used as a double-acting seal for rotary unions, axes, actuators and shafts. The media used in these applications range from mineral oil-based hydraulic liquids, environment-friendly bio-oils and water to flame-resistant hydraulic liquids and air.
To create a lubricant reservoir and increase the surface pressure against the rod, one or two circumferential notches, depending on the profile cross section, are worked into the running surface of the PTFE profile ring.
With the PTFE profile ring, the rotary seal dynamically seals off the rod surface, and with the elastic O-ring, provides a static sealing between the profile ring and the groove base.
With different material combinations, it can be used reliably across the whole pressure, speed and temperature range while additionally ensuring stick-slip free running.
To ensure that the preload on the seal is maintained under sudden changes in pressure and in direction of motion, it can be provided with two radial notches on both sides.
- Mineral oil-based hydraulic liquids
- Environment-friendly bio-oils
- Flame-resistant hydraulic liquids
- Other media, depending on the O-ring material
Flame-resistant hydraulic liquids
Other media, depending on the O-ring material
|Running surface||≤ 0,3 µm||≤ 3,0 µm|
|Groove base||≤ 1,6 µm||≤ 16,0 µm|
|Groove flank||≤ 1,6 µm||≤ 16,0 µm|
|Rods ø D||Gap size S|
|Standard design||Light design||Groove base
|Radius R||10 Mpa max.||30 Mpa max.||Number of notches||O-ring line ø|
|6,0 – 18,9||6,0 – 130,0||ød + 4,9||2,2||0,4||0,15||0,1||0||1,78|
|19,0 – 37,9||10,0 – 245,0||ød + 7,5||3,2||0,6||0,2||0,15||1||2,62|
|38,0 – 199,9||19,0 – 455,0||ød + 11,0||4,2||1,0||0,25||0,2||1||3,53|
|200,0 – 255,9||38,0 – 655,0||ød + 15,5||6,3||1,3||0,3||0,25||2||5,33|
|256,0 – 649,9||120,0 – 655,0||ød + 21,0||8,1||1,8||0,3||0,25||2||7,0|
|650,0 – 900,0||650,0 – 900,0||ød +28,0||9,5||2,5||0,45||0,3||2||8,4|
PTFE + bronze
The standard for hydraulic applications, good gliding behavior, particularly pressure and abrasion resistant, cannot be used in aqueous solutions or acids
PTFE + Glass-MoS2
Particularly good resistance to wear and abrasion, application is possible even with poor lubricating pressure fluids, in water and in water-oil emulsions
PTFE + carbon
Exceptional resistance to abrasion and extrusion; can be used in water-hydraulics
For other possible materials see our overview of PTFE materials in the technical information section.
Nitrile rubber NBR: Temperature range − 30 °C to + 120 °C
Fluororubber FPM: Temperature range − 25 °C to + 200 °C
Get your product quickly!
To help you quickly and easily find the best solution for your products, please send us your product inquiry via the form below. So you can send us your specifications and requirements directly.
Product request rotary seal, internal sealing, type ri
Discover our product competence.
With our products navigator you can get to the product you are looking for quickly.